700R4 Manual Lock Up Wiring

700R4 Manual Lock Up Wiring. Thanks a bunch to michelle for letting me take over the basement all winter. This kit will work with both carbureted and fuel injected engines and saves.

700r4 lockup kit wiring diagram
700r4 lockup kit wiring diagram from schematicenginealve99.z13.web.core.windows.net

The 700r4 had many valve body configurations. Run the red wire to a fused keyed hot terminal. Originally, this ground came from the.

Includes Gasket, Wiring Harness, Vacuum Switch, 4Th Gear Pressure Switch, Splice Connectors,.


Web what does a 700r4 lockup kit do? Web universal lockup wiring kit. Im wiring up my 700r4 with a switch to lock up the converter.

Wiring The Circuit Up Is A Simple Task For The Average.


So, make sure this information is applicable to your type of 700r4 (again mine was a '92 version). The transmission should shift into overdrive and lock the converter. Originally, this ground came from the.

Discussion Starter ยท Feb 4, 2007.


Web tan/black is another of the wires; Web i've learned a lot over the winter rebuilding my chevy automatic transmissions. Web 700r4 lock up wiring all 700r4 transmissions are wired for torque converter lock up in 4th gear only and are checked on our dyno for proper operation prior to shipment.

It's The Wire That Causes The Tc Clutch To Lock Up When A Ground Is Present On This Wire.


Route the red wire from the brake switch to a ( 20 amp ) fused ignition power source. For use with 2004r/700r4 transmissions. Run the red wire to a fused keyed hot terminal.

The 700R4 Had Many Valve Body Configurations.


Now look for a pressure. If it has 2, you are off to a good start. There are 3 wires coming off the tranny.